fbpx

Superdraft DIY project: easy, stunning wall stripes

Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.

Whether horizontal or vertical, stripes are a quick and low-cost method to add style to a room. You can cover the entire room with stripes or use it as a focal wall. There are daunting steps, like measuring and levelling the lines properly on your wall but overall, you can roll your sleeves and nail this on your own. Here’s how to do your DIY wall stripes: 

Step 1: Prepare the tools that you’ll need

  1. Measuring tape
  2. Pencil
  3. Level
  4. Masking tape or painter’s tape
  5. Putty knife
  6. Mini roller
  7. Paint trays
  8. Chip brush
  9. Paint

Step 2: Plan your stripes on paper

Grab your measuring tape and measure the walls you opt to adorn with stripes. Once you do, you can decide on how wide and deep the stripes will be. Plan it on your notebook so you can do the math properly.

Start dividing the wall from top to bottom. Don’t be sad if the measurements can’t give you same sized stripes. You can leave the bottom stripe 1-2 inches thicker than the rest. It’s almost unnoticeable after you arrange the furniture. If you’re doing vertical stripes, differ the size of the stripe based on colour. Do this to avoid a vertigo effect in your room.

Superdraft Project: DIY Wall Stripes

Step 3: Transfer your plan on the wall

It’s time to create your painting guide on the wall! Similar to what you did on paper, measure from top to bottom using a pencil and a level. You can mark the line with small dots and connect them all after.

Next, grab your tape and start taping along the pencil lines. Make sure that you put the tape exactly above and below the lines of the stripe you’re painting. The tape should go in the area that you’re not going to touch. To be sure, mark the areas you’re not going to paint with tape or a post-it. Always double check because you don’t want to end with silly looking stripes.

Seal the edge of the tape which will get wet with the new paint. Let the other side loose to avoid scraping off the base paint.

Step 4: Let’s paint!

We all know this is the easiest part of the job. Use a small brush or roller near the tape line. From here, you can paint towards the centre of the block.

Superdraft Project: DIY Wall Stripes

Step 5: Reveal the finished look

Wait for an hour or until the paint is cool and dry before peeling off the tape. Hold your hands to where you are pulling the tape. Don’t let the tape stick anywhere else. You might ruin other areas of your striped wall.

Take note of these steps and you should be able to create crisp, clean stripes in any room. 🙂

Liked this article? Follow us on Facebook, Instagram, and LinkedIn.

Find designers in Perth and WA cities/suburbs.

 

READ MORE

How to Pass the Local Building Council

The real deal about disappearing range hoods.

Learn how to light your kitchen properly.

Share on facebook
Share on twitter
Share on pinterest
Share on linkedin
Share on email

Start planning for free

Find more articles, guides and inspiration in the planning dashboard. Save them to your dream board, and start planning your dream space today.

You may also like

Join our design community

Forgot your username or password?

Download our '5 crucial things you must know before starting any build project' guide for free today

Simply fill in your details below and we’ll send a copy straight over to you

See how much you could save with a free, no-obligation quote today

Simply fill in your details below and we’ll be in touch to discuss your project

  • Drop files here or

Download The Free Guide Now

Fill in the below to get instant access: